KP80 – Single Skin Galvanized Slats

Single-skinned profiles are most common profiles to use with Classic Roller Shutters, insulation and speed is not an important element. Because of the single skin design of the profile, the door is relatively cost effective and the drum area requires less space which fulfill architectural needs.
KP80 – Single Skin Galvanized Slats

KP80 – Single Skin Galvanized Slats

80 mm height single skin curved profile available only in galvanized steel can be produced with different thickness according to the door size. This is the most common and recommended profile from our side for classical roller shutters. Special 80 mm height curved design makes the door rigid and resistant compare to market standards.

Our special design permit us to go up to extreme dimensions such as 18m length, or 10m height. Again the design makes the door less noisy because the vibration during travel between guides is lower than flat ones.

FEATURES

  • Curved Design
  • Cost-Effective
  • Rigid & Resistant to all kind of forces
  • Extreme Dimensions are possible. (Such as 18m length)
  • Less vibration compared to flat profiles

KP80 Single Skin Curved Profile Microperforation Option

Microperforation on curved design KP80 profiles which provides ventilation & visibility together is possible. Microperforated profiles is produced with 4.0mm diameter of holes on 0.8mm or 1.0mm thick profiles withapproximately 25% of air passage.

FEATURES

  •  25% of air passage.
  •  4.0 mm hole diameter
  •  Visibility & Air Passage
  •  Still resistant to force due to curved design